Showing posts with label Water Colour Background. Show all posts
Showing posts with label Water Colour Background. Show all posts

Friday, 5 October 2018

Butterfly by Ros Aggett-Madley

Today I'm sharing a page I did on retreat last month.
I was lucky enough to borrow some of the Colour Artist Inks in colours I don't normally use from a friend.  

It didn't take long to realise that I need to get them all.  They are so gorgeous and easy to work with.


I started by heat embossing in white some butterflies.  I did this on water colour paper in just a random pattern but concentrated mainly on the middle area of the page.


I dropped some Colour Artist Inks in Oasis, Lime, Citrus, Berry, Slipper and Sunburnt (which I didn't end up using) into a palette.

For this page, I'd actually chosen my photo first so these colours were chosen to match the butterfly on Miss Mackenzie's face.



I've then added some water to the page with a thick water colour brush.  I started in the middle, bringing the water out and over the butterflies.

Once I started adding Colour Artist Inks to the page, I did it in the same way.  One colour at a time, following a line of water and leading it out over the butterflies. I added more water as needed to help the ink flow.


I just used a paper towel to mop up any excess and have also heat dried between some colours to prevent it looking muddy.


I decided to use one of the butterfly stamps as an embellishment for the top of the layout.

For this I have heat embossed some Colour Embossing Powder, Dusty Charcoal, on some vellum.  


I assembled a few goodies for my photo stack.


The heat embossed butterfly has been fussy cut and adhered to the page with Scrap Dots for some dimension.


Hope you've been inspired.


Friday, 7 September 2018

Free Spirit by Ros Aggett-Madley

 Hi everyone, thanks for joining me again.
Today I'm sharing a page featuring the gorgeous Colour Artist Inks.
I had heaps of fun with these, creating a water type background.


I used a piece of water colour paper that I cut down to just under a 12 inch square.  I cut it a little smaller so that I could mount it on a piece of black card stock once my water colouring had dried.

I started the page by laying down a fairly generous amount of clean water.  I put this down only in places I wanted to use the Colour Artist Inks
I then used my wet brush to pick up the ink and drop it where the water was letting the colour flow over my page.


I started with a layer of Oasis Colour Artist Ink. 

Then one colour at a time, I added some Calypso Colour Artist Ink, Mermaid Colour Artist Ink, Grass Colour Artist Ink and a little Lime Colour Artist Ink.


 I made some mermaid tails out of a cake mould and some paper clay.


I used Oasis and Mermaid Colour Artist Ink to colour my tail, trying to alternate each colour on each line of scales.


Once finished I went over the top of the whole scale with a clear.Colour Shimmer Brush Marker.
This gave the tail a nice shimmery look.



Before I started my page, I did a little tester to see how the Colour Artist Inks reacted with water and the paper I was using.  Cause I don't like wasting anything, I used this to die cut a few wavy looking pieces to pop under my photo cluster.


For my title piece of chipboard, I have heat embossed this with Envy Colour Embossing Powder.  Again, 3 times for a nice thick layer.


Hope you've been inspired.



Saturday, 22 October 2016

Birthday Wishes by Danielle Vertigan

Today I'm here with something simple but effective.
I recently got a kit jam packed with goodies and it inspired me
from layout to cards.
Today I'm sharing with you some cards.
Sticking with the theme of graffiti that runs through the kit I created my bases.
My first step was to select colours and trim my bases to 4"x6"


On this using a black gel pen I freehand my brickwork,
getting cotton buds ready to add my colour

Using the Colour Sprays and simply removing the stalk I dipped the cotton buds and began colouring in my squares.
Overlapping some areas will create a fun colour bleed and give some variation.
You can also intensify the colour by adding another layer.
I chose Sunset, Rainforest, Love and Sapphire.
Whilst my brickwork dries I used the same process creating wood panelling.
In this selection I've used Sunset, Grape and Caribbean.


Using my cotton buds I followed the same process and this time once the panels where coloured I tilted the card and added liberal colour allowing it to drip.
Using a lettered stamp and my stazon ink I added a splash of text to replicate graffiti.
I then re did my gel pen to strengthen the colour on the lines.


I embellished using items from my kits and finished with a
"Happy Birthday" Stamp.


Some sequins where added to give a pop of colour


The cards allow the silhouettes to shine.
Themed with the background and simplicity of the Water Colouring
It all marries together beautifully.

Thanks for stopping by
Danni.




Sunday, 4 September 2016

Love Deeply by Elisa Ablett

Happy Sunday Crafter's

Happy Father's Day to all the Dad's out there :-) 

Elisa from the Design Team here with a layout featuring loads of Colour Blast including Colour Sprays, Paste, Embossing Powder and Shimmer Spray.

Two of my favourite colour schemes are blue and teal so I was dying to test the new Colour Blast Colour Sprays in Lagoon and Caribbean they matched perfectly to my colourful shirt I was wearing in the photo. win win!

The Colour Blast Colour Sprays are amazingly vibrant and have a slight shimmer once dry. 

All of the Colour Blast Products used on this layout can be found here at the Colour Blast Shop




I'll show you how the layout came together, firstly grab your Colour Blast 'Colour' Sprays in Caribbean and Lagoon, a spray bottle with water and a net stencil.



Next spray water onto your layout in a rough diamond shape and straight away spray your two colours into the water making a gorgeous watercolour swirl pattern (TIP - spray quite close to your page not from a distance that way you don't get spray over the other side of your page)


While your background is wet, dip your stencil into the pools of colour on your page and tip your stencil upside down and use it as a stamp on the edge of your coloured area



While your background is drying, let me show how i created the watercolour butterflies. 

Spray directly onto your craft mat in Caribbean, Lagoon Colour Sprays and Sunshine Colour Shimmer Spray, add a spritz of water to your colour on the mat. Using a range of butterfly stamps stamp into the colour then straight away onto your water colour paper. I used a thick heavy grade watercolour paper. Let them dry completely, then I stamped over the top of each butterfly with the same stamp with black ink to give dimension.


Once your butterflies are dry and have been stamped again with a black layer, fussy cut them out and layer them on top of each other, I only did two layers but that is personal preference :-) 

At this stage I also embossed my wood veneer in two colours, Sunshine and Deep Water and then at the end, I flicked Envy Colour Shimmer Spray over the top of the embossing to create a splatter effect on my title.


Next step, Grab your background and spray the middle with a light spray of water again and then spray quickly over the top with Sunshine Colour Shimmer Spray, also add flicks of Sunshine Shimmer Spray to the edges of the coloured area of the background. Once dry, spray the middle again with another layer of Sunshine Shimmer Spray to get a strong vibrant colour in the middle. Dry Completely.


Next step is to use a entree dinner plate and a black marker or thin sharpie and trace around it in the middle of your coloured area, each time you trace around the plate move it slightly to the left or right to create distressed circles. I then used a great circle stamp set and stamped in black ink keeping the circles in the diamond shape. I also used a small script stamp in between the circles and on the edges.


Adding to the layers, use a sunburst stencil, a palette knife and Bling Colour Blast Paste, spread the paste through the stencil and let dry completely.


Now that your background is complete you can put your layout together, I added some acetate embellishments (one was a Studio Calico Photo overlay) but I used it under my photo (which is mounted up using 3D tape). I love using Acetate, it gives the illusion of depth but lets all the lovely background show through. 

I also added black thread, my title and the butterflies to finish off the layout.

Here are some close ups!!





Well that's it from me today, I hope you have enjoyed the tutorial today :-) 

Make sure you head over to the Colour Blast Shop to view all the lovely Colour Blast goodies.

Elisa Ablett xx











Sunday, 12 June 2016

Love you Always by Elisa Ablett

Happy Sunday Everyone,

If you are attending the Brisbane Scrapbooking Expo this weekend make sure you come along and say hi to me and the rest of the Colour Blast team at Stand D25!! 

Now due to the magic of pre-scheduling posts so I can be doing two things at once, sit back with a cuppa and join me with my latest tutorial using the amazing Colour Blast products available here on the Colour Blast website.

Here is the layout I created:



Here is a list of a few of the Colour Blast Products I used to create this layout: Bling Paste, Bling Colour Shimmer Spray, Lipstick Colour Shimmer Spray, Sunshine Colour Shimmer Spray, Apple of my Eye Colour Shimmer Spray, Deep Water Paste and Colour Shimmer Spray.

 I also used a metallic White Acrylic Ink from Daler Rowney.


Step 1 - Grab the colour shimmer sprays that co-ordinate with your chosen photo, in my case I used a photo of my gorgeous niece and she was wearing a lovely dress which had large flowers on it in white, pinks, blues and greens and a set of flower stamps, I think the ones I grabbed where Ranger stamps.




Step 2 - Using a spray bottle, spray water onto your paper around the edges where you want your photo and elements to sit and using a paint brush dip the brush into the open bottles of spray (washing the brush in between colours) and dab onto the page where you have sprayed your water - this causes the colours to run together and become like watercolours. Let dry when you are happy with your colour placement and pattern as per the below photo.



Step 3 - After the colours have dried on your page, add splashes of your white acrylic ink over part of the colour, it is difficult to catch it on camera but if you go back up to the final page you can see splashes that I have applied to the bottom left hand corner of the page.



Step 4 - Lightly gesso your chosen chipboard background piece.


Step 5 - Add Deep water Paste to your chipboard using your fingertips rub it gently over the chipboard in patches, then as per the photo below spray sunshine shimmer spray and small patches of Dusty Charcoal spray as well over the chipboard.



Step 6- Add some tissue paper in the places where your photo and elements sit. Glue it down roughly and then tear bits off to make it look distressed. Then add splashes off black acrylic ink or runny black paint with a fan brush.



Step 7 - Once dry stamp a few flowers onto your coloured areas using Black Versafine or Archival Ink.


Step 8 - Add your Bling Paste once everything has dried completely in small patches over the layout.

then once dry ....again... assemble your page with your chosen elements.

I have layered in two areas, under my photo with a Kaisercraft window cutout, a My Minds Eye journal tag, Acetate butterflies fussy cut, Pinkfresh Studios phrase stickers and some final splashes of Bling Shimmer Spray. 

Here is a close up of one corner of my page....

thanks for stopping by the blog today.



Make sure you leave some love.....

Elisa Ablett xx